First off we have to talk about the two fins we have used to steer this twin. The MRTX template from FCSII offers a tall fin with a relatively narrow base compared to other twin fins. This gives you pivot and drive down the line with a bit less resistance when you want to slide the tail, while keeping enough resistance to keep the pivot without spinning completely. The boards skatey nature is kept in check by a wide fish tail which is super bladed out towards the tips of the swallow tails. This tail foil really helps bite into the face through turns, as it twists with the torque of the turn. Every rail to rail movement feels like a grind on the coping when skating; it’s really addictive! The rocker is low in the tail and high in the nose, this ensures you have plenty of engagement through the fin area whilst avoiding the nose from bogging in turns, this makes for bigger drawn out carves on steeper sections. The deck line has a slight single concave to help feel connected with the board at speeds which rolls into a pitched 50/50 rails that blades out through the outline of the board, this is to keep plenty of sensitivity and maintain hold on rail at speeds. The bottom contours is a Vee with inside double, to keep the lift through the tail which works with the rails to assist with rail to rail transition. This can really be felt on a bottom turn when the slight side cuts in the outline are put to the test, where you think a twinny would slide, this board actually speeds up, meaning you can draw every ounce of drive out of any wave. The results when all this design is put together is a twin fin that will deliver in terms of performance unlike any other on the market. Why not ride a twin?